Precautions should be paid attention to when using the dispensing machine

Dispensing machine is also known as glue coating machine, glue dropping machine, glue filling machine, etc., which is specialized in controlling the fluid, and applying the fluid drops to the product surface or the product internal automation machine. Xinghua Xiaobian reminds that the following matters need to be paid attention to when using the dispensing machine:

1. A lot of glue (like some quick sol) smells very irritating, so it needs to be dispensed in a ventilated environment.

2. Do not mix different glues in the container unless it is required for dispensing. After using glue, place glue in a cool, ventilated, dry place that is not easy to reach. Tighten the rubber cover to prevent colloid leakage. When there is a large amount of leakage, it can be cured with water before scraping.

3. Remember to wear isolation gloves when operating the dispenser. If the glue accidentally touches the hand, it should be wiped with alcohol or soaked in warm soapy water as soon as possible, and removed with acetone and glue remover, otherwise the glue can only be removed with a glue knife after drying. If you touch your skin or eyes, rinse with water, then apply a warm compress with a warm towel, and seek medical attention immediately afterwards.