Position: Home > News > Industry News

Working Process of an Automatic Tray Loading & Arranging Machine: Seven Stages from Bulk Parts to a Fully Loaded Tray

On production lines in 3C electronics, semiconductor packaging, precision hardware, medical devices, and automotive components, before parts enter downstream processes such as dispensing, inspection, placement, and encapsulation, they often first need to go through "feeding — orientation — orderly tray arrangement." This step used to be performed manually by picking and placing parts one by one, or sorted by traditional vibratory feeder bowls. It commonly suffers from unstable cycle times, part scratching, frequent jamming, and long changeover times. An automatic tray loading & arranging machine is the turnkey automation equipment designed to replace this step.
Following the actual production sequence, this article breaks down the complete workflow of an automatic tray loading & arranging machine from bulk parts to a fully loaded tray, and explains how it connects with upstream and downstream processes, for reference in equipment selection and solution evaluation.

Terminology First: Six Names, One Class of Equipment

In procurement discussions and industry communication, feeding & tray arranging machine, tray arranging & feeding machine, automatic tray loading & arranging machine, automatic tray arranging machine, fully automatic tray arranging machine, and flexible feeding & tray arranging machine generally refer to the same class of equipment — "automatic bulk-part supply + vision positioning + array placement." They differ mainly in automation level and feeding principle:
  • Feeding & tray arranging machine / tray arranging & feeding machine: a basic integrated model combining feeding and arrangement, with a mature structure, suitable for regular batches of standardized parts with stable specifications.
  • Automatic tray arranging machine / automatic tray loading & arranging machine: adds automatic recognition and motion control on top of feeding and arrangement, placing parts according to preset coordinates; a widely used general-purpose model.
  • Fully automatic tray arranging machine: builds on the automatic tray loading & arranging machine by adding storage, empty-tray supply, and loaded-tray discharge to form an unattended closed loop.
  • Flexible feeding & tray arranging machine: replaces the rigid track vibratory bowl with flexible vibratory feeding, paired with vision recognition; focused on low-damage feeding and quick changeover for irregular, precision, and delicate parts.
The workflow below follows a fully configured automatic tray loading & arranging machine; individual stages can be added or removed depending on the model.

Seven Working Stages of an Automatic Tray Loading & Arranging Machine

2.1 Storage and Quantified Replenishment

Parts are first loaded into a hopper manually or through a front-end feeding mechanism. The hopper replenishes the feeding surface to a preset level, avoiding both over-stacking from too much material and starvation waiting. The control system adjusts the replenishment rate according to the remaining material on the surface, keeping feeding continuous but uncrowded. This step corresponds to the "feeding" function and is the basic structure that distinguishes a feeding & tray arranging machine from a simple tray-arranging device.

2.2 Flexible Vibratory Spreading

When parts reach the feeding surface, a vibratory unit drives the surface in low-frequency, multi-directional motion so bulk parts spread and flatten out, gradually entering a dispersed, recognizable state.
This stage is the main difference between a flexible feeding & tray arranging machine and a traditional rigid vibratory bowl: a traditional bowl sorts parts through a spiral track, with strong friction and collision between parts; flexible vibratory feeding lets parts slide freely and lie loosely on a flat surface, reducing impact, tangling, and jamming. It suits appearance-sensitive parts such as chips, connectors, thin sheets, plated hardware, and miniature plastic components.

2.3 Vision Capture and Orientation Recognition

An industrial camera images the feeding surface. Based on a pre-trained or configured feature model, the vision system identifies each part's position coordinates, placement angle, front/back orientation, and whether it is pickable. Overlapping, occluded, or incorrectly oriented parts are not selected; they continue to vibrate and wait for the next recognition round. For direction-sensitive parts (e.g., components with keyways, polarity, or markings), the system calculates the rotational offset to support subsequent picking.

2.4 Coordinate-Guided Picking

The vision system sends coordinates and angles of pickable parts to the motion control unit. The robot arm or picking module moves to the target position and picks parts by vacuum suction or flexible gripper. The picking method is matched to material and weight: thin flat parts generally use vacuum suction, while blocky or irregular parts can use a flexible gripper, reducing surface damage during handling.

2.5 Array Placement

Picked parts are carried above the tray (fixture) and placed one by one into corresponding slots or grid points according to preset row/column spacing and array rules. The arrangement parameters of a tray arranging & feeding machine — row and column counts, spacing, starting position, orientation rules — can all be set on the HMI; when changing products, the corresponding recipe is recalled. The system counts during placement to determine whether a tray is full.

2.6 Empty-Tray Supply and Loaded-Tray Discharge

Basic models can use manual empty-tray loading and loaded-tray removal; a fully automatic tray arranging machine adds an empty-tray magazine and a loaded-tray conveyor. Empty trays are supplied automatically and loaded trays pushed out automatically, with the arm completing tray changeover, so the machine runs as an unattended continuous loop. This is the main boundary between "fully automatic" and "automatic."

2.7 Data Collection and Upload

During operation, the machine can record output, cycle time, losses, and alarm logs, and optionally connect to an MES or factory management system for scheduling and traceability. This stage is optional; interfaces can be reserved in highly digitized lines.

Process Integration: How a Tray Arranging & Feeding Machine Connects to the Existing Line

An automatic tray arranging machine does not run in isolation; loaded trays usually feed directly into downstream processes:
  • Upstream: connects to the hopper, lifting/replenishment mechanism, or previous processing station for continuous feeding;
  • Mid-line: arranged trays move by conveyor to dispensing, marking, inspection, cleaning, or placement stations;
  • Downstream: loaded trays are sent by conveyor to buffer, collection, or manual sampling areas.
In line layout, verify in advance whether upstream/downstream cycle times match, whether tray specifications are unified, and whether footprint and access meet plant conditions, to avoid high single-machine efficiency with whole-line waiting.

Parameters to Check During Selection

Based on the workflow above, confirm the following during selection:
  1. Part characteristics: size range, weight, regularity of shape, surface sensitivity to scratches, and polarity/orientation requirements; prioritize a flexible feeding & tray arranging machine for irregular and delicate parts.
  1. Cycle-time requirement: target hourly output, parts per tray, and arrangement density, to derive the required vision and motion configuration.
  1. Changeover frequency: for multi-variety, small-batch, frequent-changeover conditions, focus on recipe switching and setup time.
  1. Environmental requirements: cleanliness, ESD, dust-proofing, footprint, and power/air supply conditions.
  1. Expansion interfaces: whether MES integration is needed and whether room is reserved for whole-line integration and future stations.

The more thoroughly these parameters are checked, the better the solution match and the shorter the commissioning and ramp-up period.


About Highwah

Shenzhen Highwah Intelligent Technology Ltd. belongs to the Xinghua Technology Group, headquartered in Shenzhen. The company has long focused on automation equipment R&D and non-standard customization, with a product matrix covering vision dispensing, laser cleaning, automatic tray arranging, buffering & transfer, and various non-standard integrated equipment, serving electronics, semiconductor, medical, new energy, and automotive component industries. In the tray-arranging direction, Highwah provides solution evaluation and customization from single machines to whole lines, based on the customer's part size, capacity target, and plant layout.

If you are evaluating an automatic tray loading & arranging machine, a flexible feeding & tray arranging machine, or a fully automatic tray arranging machine, please provide part samples and capacity requirements; we can offer selection advice and configuration references based on actual working conditions.



Quote

Contact

Tel

189 2251 4695